Transmission repair shop software
For automatic transmission, CVT and dual-clutch specialists: teardown findings and an itemised estimate approved by link, deposits for rebuild kits, clutch packs and valve bodies in stock, long jobs tracked, mileage warranty on the completion report.

ServiceCenterSoft is job-tracking software for transmission shops: conventional automatics with a torque converter, CVTs, automated manuals and dual-clutch units. Every transmission is a ticket with a number, a promised date, an itemised estimate and a full history. It runs in the browser — on the front-desk PC and on a phone in the bay.
The quote problem every rebuilder knows
A customer calls about harsh shifts or slipping and asks what it will cost. Honest answer: it depends on what is inside. A road test, a code read and a look at the fluid give you a range. The real answer comes after teardown — burnt clutch packs, worn bores in the valve body, a damaged pump, worn bushings. And for the customer it is often the biggest bill the car will ever get.
Where transmission shops lose money:
- the customer remembers the low end of the range, and the post-teardown estimate feels like a bait and switch;
- the unit is out and apart, the customer declines, and nobody wrote down who pays for removal and reassembly;
- a rebuild kit is ordered with no deposit, and the customer stops answering;
- a torn-down unit sits for two weeks waiting on parts, and nobody remembers when they were ordered;
- it comes back six months later and the mileage at the time of repair was never recorded.
Who brings you work
Most transmission shops serve two kinds of customer. General repair garages pull the unit and drop it off on a pallet — that is steady wholesale work, and one garage may have several units with you at once. Retail customers drive in and you do the lot: diagnosis, R&R, rebuild, install and relearn.
Each garage can be set up as a partner: a partner field on the intake form, a partner filter on the job list. One click shows everything you are holding for that garage. When the garage itself is the customer, its name goes in the company field and the customer record shows its jobs, payments and balance — handy if it settles monthly.
The same garages often send other units too: see turbocharger repair software and diesel injector repair software. Transmission control modules as electronics are covered by auto electronics repair software, and off-highway hydraulics by hydraulics repair software.
Intake: what to record before anything comes apart
The intake form takes the equipment type (“Automatic transmission”, “CVT”, “Dual-clutch”), the transmission and vehicle model, the unit’s serial number, the complaint in the customer’s words, condition and what came with it. For a unit dropped off by a garage, note in the accessories field whether the torque converter and control module came with it.
About mileage and VIN: there are no dedicated fields for them. Put them in the “Notes for the technician” field — visible to staff only, not in the customer portal. The price range you quoted at the counter can go there too.
If you charge for diagnosis and teardown even when the job is declined, give the equipment type a diagnostic price and set the ticket’s base to “diagnostics only”. The amount is on the job sheet the customer signs, before a single bolt comes out.

Teardown findings and estimate approval
Once the unit is apart, the technician types the findings into the work log: “forward clutch pack burnt, steels heat-marked, valve body worn at the pressure regulator bore, pump within spec”. The work log prints on the completion report, so the customer gets a list, not a story.
Then the estimate, in lines with quantities, from your list of standard jobs or from stock: “overhaul gasket and seal kit — 1”, “friction plates, set — 1”, “steel plates, set — 1”, “filter — 1”, “valve body rebuild — 1”, “transmission rebuild labour — 1”, “ATF — 8” litres. The total adds itself up. Each line has its own technician, so if one tech did the R&R and another the valve body, each is credited for their own lines in the payroll report.
The ticket moves to “Awaiting approval” and the estimate goes to the customer by email or Telegram. The link shows every line with “I agree” and “I decline” buttons; the answer and its date land in the ticket history. Approved by phone? Add it as a comment on the status change.
Declined? The unit goes back together unrepaired. The “diagnostics only” base stays, and reassembly and install go on as an estimate line — the customer saw that charge on day one.

Deposits and payments
A ticket can take several payments: a deposit for the kit once the estimate is approved, the balance at pickup. The ticket shows paid and outstanding amounts, and the “unpaid” filter lists every unit that left without full payment.
Stock: kits, clutch packs, valve bodies
Stock is a movement journal: receipts with cost price and supplier, parts used on a job as estimate lines, returns, write-offs with a reason, and stocktakes. Overhaul kits, friction and steel plate sets, filters, solenoids, bushings, seals and remanufactured valve bodies each get a minimum level, and the “running low” tile shows what to reorder.
Quantities are whole numbers. Count fluid in whole litres or by the container, gaskets by the piece or the kit.

Long jobs without lost units
Parts for a specific transmission can take one or two weeks, and torque converters often go out to a specialist. To keep a torn-down unit from being forgotten:
- a “Waiting for parts” status and a parts order raised from the ticket — when it was ordered and whether it has arrived; the order can be emailed to the supplier;
- marking an order as arrived offers to book the part straight into stock;
- a promised date and a days-in-shop counter on the ticket; moving the date is recorded in the history;
- an “overdue” filter and an urgent flag for vehicles needed yesterday;
- your own statuses, such as “Torn down” or “Converter out for rebuild”, added to the status list.
When the job is done, the customer is told by email or Telegram, and finished units show how many days they have been waiting for pickup.

Mileage warranty and comebacks
Rebuilds are usually warranted for so many months or so many miles, whichever comes first. Your general terms go into the print templates, which you edit yourself. The specifics go into the recommendations field: “warranty 12 months or 12,000 miles from 114,500 miles; fluid change due at 30,000 miles”. Recommendations print on the completion report and are visible in the customer portal.
When a unit comes back, search by serial number, model or customer to see the previous job and estimate. Book the new ticket as “Warranty” or “Repeat repair”; those can be filtered in the job list, though reports do not break them out separately. What your warranty covers depends on your terms and the law where you work.
What transmission work typically costs
A rough guide only — prices vary by country, unit and condition: diagnosis €60–150, removal and installation €300–900, automatic transmission rebuild €1,500–4,000 including parts, valve body repair €300–1,000, CVT repair €1,500–4,500, dual-clutch replacement €700–1,800 plus parts, fluid service €150–450. You set your own prices in your list of standard jobs.
What it does not have
- dedicated mileage and VIN fields — use the notes for the technician;
- bay scheduling or appointment booking;
- photos or file attachments on a ticket;
- fractional quantities in stock;
- a scan tool connection or relearn procedures;
- SMS, a mobile app, online payment by the customer, supplier integrations.
What it costs
One price for the whole shop — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a transmission, type teardown findings into the work log, build an estimate and send it for approval.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- Mileage, VIN and the quoted range go in the notes for the technician.
- Teardown findings in the work log, printed on the report.
- Itemised estimate approved by link, answer in the history.
- Declined after teardown — “diagnostics only” plus a reassembly line.
- Deposit for the kit, balance at pickup.
- Kits, clutch packs and valve bodies in stock with minimum levels.
- Mileage warranty in the recommendations, on the report.
- €20 a month for the whole shop.
See also
Steering rack repair software for rack and power steering shops
For shops that rebuild steering racks, power steering pumps and EPS units: racks from trade garages filtered by partner, test-bench results in the work log, bushes and seal kits in stock, exchange racks and core charges, warranty terms on the completion report.
Read moreLab equipment repair software
For service businesses repairing centrifuges, pipettes, analysers and moisture analysers: labs and universities as customers, bench work and site visits, pipette batches, results on the work report, routine servicing kept in order.
Read moreStarting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.