Diesel injector repair software for fuel injection shops
For diesel fuel injection specialists: a full set of injectors from one engine on a single ticket with a result for each, test bench readings in the work log, trim codes on the completion report, batches from garages, nozzles and valves in stock.

ServiceCenterSoft is job-tracking software for diesel fuel injection specialists: common rail injectors (solenoid and piezo), unit injectors, mechanical injectors and high-pressure pumps. Every job is a ticket with a number, a promised date, an itemised estimate and a history. It runs in the browser — on the PC next to the test bench and on your phone.
If you also repair engine control units, that is covered on a separate page: auto electronics repair software. This one is about fuel.
Who it is for, and what goes wrong
Most of your work arrives as a box: a garage pulls four injectors from a van or six from a truck and drops them off together. A fleet manager wants the vehicle back on the road; the garage wants a price by this afternoon. Meanwhile there are three more boxes on the bench, two of them with the same part number.
Where time and money usually leak:
- injectors from two identical engines get mixed up, and nobody can say which came from which cylinder;
- the before-and-after bench figures were on a printout that left with the box;
- the garage calls for the trim codes, and nobody wrote them down;
- the nozzle you need is out of stock while a truck stands idle;
- one injector of four is not worth repairing, and the customer finds out at collection;
- an injector comes back a month later and nobody remembers what was done.
One ticket for the whole set
In the software a ticket covers one item. So a set is booked in as one item: an equipment type such as “Common rail injectors, set” with its own test fee, and the part number in the product code field. A ticket has a single serial number field, so the serial numbers of the individual injectors go into the accessories field with their cylinder positions — “6 pcs: cyl. 1 — no. …, cyl. 2 — no. …”. That field prints on the job sheet the customer signs.
The estimate is built in lines with quantities: “bench test — 6 × price”, “injector overhaul — 4 × price”, “nozzle — 4 × price” from stock, “coding — 6 × price”. The total adds up by itself.
To be clear about statuses: a ticket has one status for the whole set; there is no separate status per injector inside it. If each injector needs to move on its own — one goes back unrepaired, another waits for a valve — give each its own ticket by copying the first: customer, type and description carry over, and you enter each serial number.

Test bench results go into the work log
The software does not connect to your test bench or import its report, and files cannot be attached to a ticket. The figures that matter are typed into the work log: “No. 1: back-leak 48, limit 20, control valve and nozzle replaced, after repair 14; no. 2 within spec; no. 3 body damaged, not repairable.” The work log prints on the completion report, so the garage gets a result for every injector in writing. If you print the bench report, put it in the box with the injectors.
Trim codes on the completion report
After an overhaul an injector usually needs a new correction code — IMA, QR or whatever the manufacturer calls it — programmed into the engine control unit. Your diagnostic equipment or the garage does that; the software writes nothing to the ECU. Its job is to keep the code safe: enter the codes by cylinder in the recommendations field, and they print on the completion report. Add the advice that goes with them: “replace the fuel filter, check rail pressure”.
High-pressure pumps: approval before you strip it
A pump is its own item on its own ticket. Pump work is expensive, so diagnosis comes first. The ticket moves to “Awaiting approval” and the estimate goes to the customer by email or Telegram; the link shows every line with “I agree” and “I decline” buttons, and the answer and its date land in the ticket history. Agreed by phone instead? Note it as a comment on the status change. If they decline, switch the ticket’s base to “diagnostics only”.
When a pump has failed and metal has gone through the system, new injectors without a flush will not last. Put that in the recommendations too — the warning is on the report with a date.

Work from garages and fleets
Each garage can be set up as a partner: there is a partner field on the intake form and a partner filter on the job list, so one click shows everything you are holding for that garage. When the garage itself is the customer, its name sits in the company field, and the customer record shows all its jobs, payments and any balance owed.
Every ticket has a promised date, an urgent flag and an “overdue” filter. When the work is done, the customer is told by email or Telegram. Finished jobs show how many days they have been waiting, so a box nobody collects does not vanish into a cupboard. A ticket can take several payments — a deposit for parts and the balance later — and the “unpaid” filter lists work handed over without payment. More on the certificate of completed repair work.
Agricultural and plant customers are covered on the agricultural machinery repair software page.
Stock: nozzles, valves and kits
Stock is a movement journal: receipts with cost price and supplier, parts used on a job as estimate lines, returns and stocktakes. Nozzles, control valves, armatures, shims, seals and pump kits each get a minimum level, and the “running low” tile tells you what to reorder. Quantities are whole numbers, so count shims by the piece or by the kit. A parts request can be emailed to your supplier from the ticket. More on spare parts tracking.

Comebacks and warranty
A search by part number, ticket number or customer shows what was done to that set last time. If an injector comes back with the same fault, choose the “Repeat repair” type; those tickets can be filtered in the job list, though reports do not show them separately. You set your own repair warranty in the terms on the job sheet or report; what it covers depends on your terms and the law where you work.
What injector repairs typically cost
A rough guide only — prices vary by country, injector type and condition: bench test €20–50 per injector, solenoid common rail injector overhaul €80–200 each plus parts, piezo injector €150–350, mechanical injector service €20–60, coding €15–40 per injector, common rail pump overhaul €250–900 plus parts. You set your own prices in your list of standard jobs.
What it does not have
- a separate status per injector inside one ticket;
- a test bench connection or report import;
- photos or file attachments on a ticket;
- ECU coding — that stays with your diagnostic equipment;
- exchange-unit or core-charge tracking;
- SMS, a mobile app, online payment by the customer, supplier integrations.
What it costs
One price for the whole shop — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: add a “Common rail injectors, set” type, book in four injectors with their numbers in the accessories field, type the bench figures into the work log and print the completion report.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- A set of injectors on one ticket, serial numbers by cylinder in the accessories field.
- Bench results per injector in the work log, printed on the report.
- Trim codes in the recommendations, also on the report.
- Need a status per injector — copy the ticket for each one.
- Pumps — estimate approval before stripping.
- Garages as partners with a list filter; “ready” by email or Telegram.
- Nozzles and valves in stock with minimum levels.
- €20 a month for the whole shop.
See also
Starting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read morePhone repair shop software
Intake in a minute, screens and batteries tracked, a ready-for-pickup email, output per technician.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.