Lab equipment repair software
For service businesses repairing centrifuges, pipettes, analysers and moisture analysers: labs and universities as customers, bench work and site visits, pipette batches, results on the work report, routine servicing kept in order.

ServiceCenterSoft is repair-tracking software for an independent lab equipment service: centrifuges and microcentrifuges, manual and electronic pipettes, benchtop analysers, moisture analysers, incubators, shakers and stirrers. Every job gets a number, a due date, an itemised estimate and a full history. It runs in the browser — on the PC next to your bench and on your phone when you are in a customer’s lab.
Who this is for
Your customers are labs: QC labs in factories and food plants, contract testing labs, private diagnostic labs, university departments and research groups. Their equipment runs for years, and when a centrifuge or analyser goes down, samples queue up. Small instruments come to your bench; large ones mean a site visit.
Typical trouble spots:
- a department sends thirty pipettes, and six months later nobody can say which ones were checked or what the readings were;
- “as found” and “as left” values sit in a technician’s notebook while the lab manager asks for them in writing;
- the university pays against its own paperwork weeks later, and unpaid jobs slip through;
- a routine service date passes because only one person remembered it;
- a centrifuge comes back with the same fault and nobody knows which parts were replaced.
One account per lab or department
Instruments are dropped off by technicians, students or the lab manager, but the customer in the software is one: the lab’s or department’s name goes in the “Company” field, appears on the job sheet and report, and finds every instrument in the job list. The customer card shows all jobs, payments, the balance owed and notes — building, room, who to call before a visit, the purchase order number.
Institutions rarely pay on the spot. A job can take several payments — a deposit for parts, the rest by bank transfer — and the software shows what is still due, while the “unpaid” filter lists jobs handed back but not paid for. There is no invoice form: the software prints a job sheet and a work report, and you raise the invoice in whatever you use for accounting.
Bench jobs and site visits
Pipettes, centrifuges, moisture analysers and shakers usually come in. Analysers plumbed into water and drains are fixed on site. Add your own repair type, such as “Site visit”, and a “Call-out” line with a price in the work list: it goes on the estimate, and the job list can be filtered by repair type. There is no visit calendar — you agree the slot as usual and set the promised date on the job; once it passes, the job turns red and lands in the overdue filter.
Lab equipment may come back from contact with samples or reagents. Put “we accept instruments only after decontamination” in the terms on your job sheet, and at intake note in the condition field “decontaminated, as stated by the customer”. Both are printed on the sheet the customer signs.

Pipettes by the box
A job in the software is one instrument with one serial number. For a box of pipettes you have two options. The quick one: a device type such as “Pipettes, batch”, all serial numbers listed under contents, and an estimate with quantities — “pipette check — 30 × price”, “seal kit — 4 × price”. The whole batch then shares one status.
The thorough one: a job per pipette. The second and following jobs are copies of the first — customer, type and description are already filled in, you enter each serial number. A year later, searching by serial number shows that exact pipette’s history.
Results on the work report
The software does not connect to instruments or import test files, and you cannot attach files to a job. The figures that matter go into the work log: “centrifuge: imbalance error, shock mounts replaced, 30-minute run at max speed — no faults”; “pipette S/N …: error before adjustment 2.8 %, after 0.5 %”. The work log is printed on the work report along with the estimate and recommendations, so the lab has the results on paper. More on the work completion report.
A note on calibration. Formal calibration with a certificate, and legal verification where it applies, are carried out by accredited calibration laboratories or the relevant authorities, under the rules of your country. A service business repairs, checks, adjusts and prepares the instrument. The software does not issue calibration certificates. If an instrument goes out for calibration, add a status such as “Sent for calibration” so the job list shows where it is.
A moisture analyser is essentially a balance with a heater; for balances, seals and preparing for verification see scale repair software.
Planned maintenance without a scheduler
The software has no maintenance scheduler and sends no reminders. What works in practice: a repair type “Planned maintenance” so those jobs can be filtered; the next service date in “Recommendations”, which is printed on the work report; a short “what and when” list in the customer’s notes; reminders in your own calendar. A serial number search shows when the instrument was last with you and what was done.
If you also service clinical equipment — dental handpieces, oxygen concentrators, ECG units — see medical equipment repair software.
Approval, parts and stock
An analyser repair can cost a large share of a new unit. After diagnosis the job goes to “awaiting approval” and the estimate is sent by email or Telegram; the customer sees every line and the total and clicks “I agree” or “I decline”, and the answer is saved with the date in the job history. Approved by phone — add it as a comment on the status change. Not worth fixing — “beyond repair”.
Stock is a movement log: goods in with cost and supplier, parts issued to a job as an estimate line, stocktakes. Seals and pistons, shock mounts, lid locks, lamps and pumps each get a minimum level, and the “running low” tile shows what to reorder. A parts request can be emailed to the supplier from the job. More on spare parts tracking.

When the job is done, the customer gets an email or a Telegram message, and finished instruments show how many days they have been waiting.
Typical repair prices
A rough guide only — prices depend on region, model and parts: pipette check and adjustment €25–60, pipette repair €40–120, centrifuge repair €80–300 plus parts, moisture analyser €80–250, on-site analyser repair €200–1,500 plus parts, call-out €60–150. You set your own prices in the work list.
What it does not do
- no maintenance scheduler or calibration reminders;
- no calibration certificates and no invoices — a job sheet and a work report;
- no instrument connection, photos or file attachments, no visit calendar;
- no SMS, mobile app, online payment by customers or supplier integrations.
What it costs
One price for the whole business — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a centrifuge with its serial number, write the test result in the work log and print the report.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- Each lab or department is one account with company name, balance and notes.
- Site visits are a repair type plus a call-out line on the estimate.
- Pipette batches: one job for the box, or a copied job per pipette.
- Test results go in the work log and print on the report.
- Formal calibration is for accredited labs; no certificates from the software.
- Planned maintenance: a repair type and the next date in recommendations — no scheduler.
- €20 a month for the whole business.
See also
Starting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read morePhone repair shop software
Intake in a minute, screens and batteries tracked, a ready-for-pickup email, output per technician.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.