Test equipment repair software
For shops repairing oscilloscopes, multimeters, bench power supplies, soldering stations and signal generators: other repairers and companies as customers, before-and-after readings on the work report, hard-to-find parts on order.

ServiceCenterSoft is repair-tracking software for a business that fixes electronic test and measurement equipment: oscilloscopes, digital multimeters, bench power supplies, soldering and hot-air rework stations, signal and function generators, LCR meters, electronic loads. Each instrument gets a numbered job with its accessories, estimate, work log and history. It runs in the browser, on the bench PC and on your phone.
Who sends you instruments
Test equipment repair has two kinds of customers. One is people who repair things themselves: electronics shops, hobbyists, engineers who bought a used scope online. The other is organisations: maintenance and instrumentation departments, QA labs, production test, universities and colleges. The first group wants it quick and affordable; the second sends ten identical meters and pays by bank transfer thirty days later.
Where it usually goes wrong:
- the scope goes back and the customer insists there were two probes, not one;
- the readings you took after the repair are on a sticky note, not on anything the customer receives;
- an attenuator relay was ordered weeks ago and nobody knows from whom or when;
- a soldering station repair costs nearly as much as a new one, and the customer learns that at collection;
- five identical meters from one plant get mixed up because the asset tags were in a notebook.
Intake: probes, leads, options
The job holds the instrument type, model, serial number and a “Product code” field — a good place for the customer’s asset tag. Under contents you list everything that came in: “2 × 10:1 probes, mains lead, USB cable, no battery cover”. Under condition: scratched screen, cracked case, missing knobs. Both are printed on the job sheet the customer signs, so the argument about the missing probe never starts.

“Notes for the technician” are not shown to the customer: “opened before”, “firmware version X, options enabled”, “customer put mains on the current input”. Advanced search finds an instrument by model, serial number or product code, even from part of the number — so a scope that comes back a year later brings its history with it.
Repair is not calibration
After an oscilloscope repair or a meter fix you check the result: apply a reference voltage, compare the reading, look at channel bandwidth. The technician writes this in the work log as plain text — “DCV 10 V: before 9.12, after 10.003; CH2 bandwidth OK”. The work log is printed on the work report, so the customer gets on paper what was checked and what it showed. The “Recommendations” field goes on the report too.
Honestly about calibration. Calibration with a formal certificate is done by accredited calibration laboratories under the rules of your country, and some instruments also need legal verification by an authorised body. A repair shop repairs, tests, adjusts and prepares the instrument. The software does not print calibration certificates, does not track calibration due dates and sends no reminders. If you send an instrument out for calibration, create your own status such as “Out for calibration”, with a colour and a tile above the list, so you can see in one click what is not on your bench. If the customer wants you to remember the next due date, put it in “Recommendations” and in the notes on their customer record. Centrifuges, pipettes and analysers are a different job — see lab equipment repair software.
Parts you cannot just buy
In test equipment the slow part is not soldering, it is sourcing: a custom ADC, an input attenuator relay, a display for a discontinued model, an encoder, a high-voltage capacitor. A parts request is linked to the job and can be emailed to a supplier from the software; when the part arrives it goes straight into stock. Meanwhile the job sits in “Awaiting parts”, and the promised date keeps it visible: overdue rows turn red and an “overdue” tile gathers them.
When a marking on a board is unclear, an SMD code guide helps — for example SMD resistor codes: precision divider resistors are a common cause of a meter reading out of spec.
Tips, heaters, fuses and donor boards
Stock is a movement log: goods in with cost and supplier, parts issued to a job as an estimate line, returns, write-offs with a reason, stocktakes. Soldering tips and heaters, thermocouples, 10 A meter fuses, probes, jacks and buttons each get a minimum level, and a “running low” tile shows what to reorder. A board from a donor instrument can be a stock item too, so you know you have it and which job it went into. More on spare parts tracking.

Cheap meter, expensive scope
A multimeter or a soldering station is often worth about as much as its repair. Set a diagnostics price for the device type, switch the job to “diagnostics only” when the customer hesitates, and close it as “beyond repair” when it is not worth fixing — the reason stays in the log.
A scope is different: the bill can be substantial. After diagnosis the job goes to “awaiting approval” and the itemised estimate is sent by email or Telegram. The customer opens the link, sees each line and the total, and clicks “I agree” or “I decline”; the answer lands in the history with the date. For a rare part you can take a deposit — a job can have several payments, and the software shows what is left.

Companies as customers
A customer record has a “Company” field, printed on the job sheet and the report, and shows all jobs, payments and the outstanding balance. Notes hold the practical bits: who to call, how instruments are handed over. Ten identical meters? Fill in the first job and copy it — customer, model, fault and contents carry over, each copy gets its own serial number. The “unpaid” filter lists what has gone out but has not been paid. There is no invoice — you print the job sheet and the work report. If the same plant also sends drives, PLC boards or control electronics, see industrial electronics repair software.
When the job is done, the customer gets an email or a Telegram message, and the ready list shows how many days each instrument has been waiting.
Typical repair prices
A rough guide only — prices depend on your area, the model and the parts: bench diagnosis €30–80, multimeter repair €40–120, soldering station €40–130, bench power supply €60–200, signal generator €100–400, oscilloscope repair €120–600, parts extra. You set your own rates in the works list.
What it does not do
- calibration certificates or reports, calibration due dates and reminders;
- connecting to instruments or importing measurement data — readings are text in the work log;
- photos and file attachments, serial-number tracking in stock, supplier integrations;
- invoices, SMS, a mobile app, online payment by the customer.
What it costs
One price for the whole business — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a scope with its probes under contents, log your readings in the work log and set the job to awaiting parts.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- Probes, leads and options listed under contents, signed by the customer.
- Before-and-after readings in the work log and on the report; no calibration certificates.
- Hard-to-find parts: a request to the supplier, “awaiting parts” and a promised date.
- Tips, heaters, fuses and donor boards in stock with minimum levels.
- Batches from companies: copied jobs with asset tags.
- €20 a month for the whole business.
See also
Starting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read morePhone repair shop software
Intake in a minute, screens and batteries tracked, a ready-for-pickup email, output per technician.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.