Surveying equipment repair software
For a service centre repairing and adjusting total stations, levels, GNSS receivers and laser levels: contractors, surveyors and rental fleets as customers, serial numbers and case contents on a signed job sheet, check results on the work report, loan instruments and busy-season deadlines.

ServiceCenterSoft is repair-tracking software for a survey instrument service centre: total stations, robotic and reflectorless instruments, automatic and digital levels, theodolites, GNSS receivers and data collectors, line lasers and rotating lasers. Every instrument gets a job with a number, its serial number, what came in the case, an estimate, a history and a work report. It runs in the browser on the bench PC and on your phone.
Who brings instruments in
Your customers are land surveyors, civil engineering contractors, builders, utility and highway crews, and equipment hire companies with a rental fleet of levels and total stations. For all of them an instrument on your bench means a crew standing idle or a setting-out job pushed back. The first question is “when can I have it?”, not “how much?”.
Where it usually goes wrong:
- a total station went over with the tripod — “it’s just a bit out” — and on the bench you find a cracked housing and a shifted compensator;
- it came in a hard case with a tribrach, two batteries and a charger, and goes out with one battery, and nobody wrote down what was there;
- in spring ten instruments arrive in a week and each customer was promised Monday;
- you lent a level to a good customer, and a month later nobody knows who has it;
- the site engineer wants a calibration certificate for an instrument that has just been repaired.
Booking in: serial number and case contents
The job holds the model, serial number and date of sale — the date tells you whether the manufacturer’s warranty still applies, and the serial number shows every earlier visit. The “Product code” field is handy for the customer’s asset tag. Advanced search finds an instrument by part of the serial.
“Contents” lists everything in the case: tribrach, batteries and how many, charger, data collector, antenna, cables, sunshade, keys. “Condition” records chips, impact marks, fogging behind the glass, scratches on the objective lens. Both are printed on the job sheet the customer signs. What the customer told you about the fall or the rain goes into the technician’s notes — the customer does not see them, the technician does before opening the instrument.

A rental company drops off five identical levels for a pre-season check — fill in the first job, then copy it: customer, instrument type and model carry over, and each copy gets its own serial number.
Adjustment, collimation and calibration
Much of the work is checking and adjusting rather than replacing parts: collimation error, vertical index, compensator, laser plummet, vials, reticle, the beams of a laser level. The technician records the before and after figures in the job’s work log — “collimation 18″ before, 2″ after; compensator adjusted”. The work log is printed on the work completion report, so the customer leaves with a document showing what was checked.
A note on calibration. A formal calibration certificate, or legal verification where your country requires it, comes from an accredited calibration laboratory or the relevant authority. Your service repairs, checks, adjusts and prepares the instrument. The software does not issue calibration certificates and does not remind anyone when the next calibration is due. If an instrument goes out for calibration, add your own status such as “Sent for calibration”, with a colour and a tile above the job list, so you can see at once what is not in the building. The next check date can go into the recommendations, which are printed on the report.
If you also service lab instruments, that is a different workflow — see lab equipment repair software.
Loan instruments
Good customers ask for a loan unit while theirs is in. There is no separate loan-fleet module, and we will not pretend otherwise. What works with what is there:
- add a “Loan instrument during repair” line to your list of services — free or with a daily hire rate; it appears on the estimate and the report;
- put the loan unit’s serial number in the technician’s notes — full-text search finds who has it;
- add a “Loan unit out” status with a tile above the job list to see every job where a loan still has to come back.

The busy season
From spring into summer, instruments arrive in waves. Set a promised date at booking in; once it passes, the row turns red and the “overdue” tile gathers those jobs. The “urgent” flag marks instruments a site is waiting on. When the job is done the customer gets an email or a Telegram message, and every finished instrument shows how many days it has been waiting for collection.
Winter is quieter — a good time to book a contractor’s whole fleet for adjustment. A repair type such as “Pre-season service” lets you filter those jobs and count them in the period statistics.
Drop damage: estimate first
Repairing a dropped total station can cost half the price of a new one. Give the instrument type its own diagnostic fee. After teardown the job moves to “awaiting approval” and the estimate goes to the customer by email or Telegram — every line, the total, and “I agree” / “I decline” buttons. The answer is saved in the history with the date. A refusal closes the job with the “repair refused” status, and the diagnostic fee stays on it.

Encoders, boards, displays and housing parts can take weeks: the job sits in “awaiting parts”, and the parts request can be emailed to the supplier from the job. Batteries, chargers, tribrachs, cables, circular vials and cover glasses live in stock: goods in with cost and supplier, parts used as estimate lines, a minimum level and a “running low” tile. More on spare parts tracking.
Companies, balances and paperwork
A site manager, a surveyor and a driver may all bring instruments from the same firm — it is still one customer. The “Company” field prints on the job sheet and report, and the customer card shows every job, payment and outstanding balance. A job can take several payments — a deposit for parts, the rest by bank transfer — and the “unpaid” filter shows what has gone out without payment. The software does not produce invoices; it prints the job sheet and the work report.
Contractors often bring thermal cameras and rangefinders too — see thermal imaging camera repair software.
Typical repair prices
A rough guide only — it depends on the country, the model and the parts: diagnosis €40–120; level check and adjustment €60–150; total station check and adjustment €150–400; line or rotating laser adjustment €50–180; drop repair €250–1,200 plus parts; GNSS receiver connector or power fault €100–400. You set your own prices in the list of services.
What it does not do
- no loan-fleet module, no calibration schedule or reminders;
- no calibration certificates or test reports as separate documents, no invoices;
- no connection to instruments, no upload of measurement files, photos or attachments;
- no SMS, no mobile app, no online payment by the customer, no supplier integrations.
What it costs
One price for the whole workshop — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a total station with a tribrach and two batteries under contents, log the adjustment figures and print the report.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- Serial number, date of sale and case contents — on the job sheet the customer signs.
- Before/after adjustment figures — in the work log and on the report; certificates come from accredited labs.
- Loan instruments — an estimate line, the serial in notes, your own status.
- Busy season — promised dates, “urgent”, “overdue”, ready notices by email and Telegram.
- €20 a month for the whole workshop.
See also
CNC machine repair software
For CNC service companies and spindle repair shops: manufacturers and joinery workshops as customers, on-site machine repairs and spindle rebuilds on the bench, bearings and drives in stock, and due dates for customers who lose money every day a machine is down.
Read moreTest equipment repair software
For shops repairing oscilloscopes, multimeters, bench power supplies, soldering stations and signal generators: other repairers and companies as customers, before-and-after readings on the work report, hard-to-find parts on order.
Read moreStarting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.