CNC machine repair software
For CNC service companies and spindle repair shops: manufacturers and joinery workshops as customers, on-site machine repairs and spindle rebuilds on the bench, bearings and drives in stock, and due dates for customers who lose money every day a machine is down.

ServiceCenterSoft is repair-tracking software for businesses that service CNC machines and rebuild spindles. CNC routers and nesting machines in joinery and cabinet shops, lathes, machining centres, laser and plasma cutters — plus the spindles that come off them and land on your bench. Every job gets a number, a due date, an itemised estimate and a full history. It runs in the browser: on the PC in your shop and on your phone when you are standing next to a machine on a customer’s floor.
Who your customers are
CNC machines belong to businesses: cabinet makers cutting doors and carcasses, job shops and machining subcontractors, sign makers routing acrylic and composite panels, small manufacturers running two or three machining centres. When a machine is down, orders stop and operators stand around. Every day of downtime costs them money, so the first question is always “when will it run again”, and only then “how much”.
Where a CNC service business usually loses track:
- an engineer drives out, swaps an axis drive, and the call-out and hours never get written down — the invoice is written from memory;
- a spindle was rebuilt two years ago, and nobody can say which bearings went in or what the runout was afterwards;
- a matched bearing set is a week away, and the customer calls daily to ask where things stand;
- limit switches and collets run out right before three call-outs in a row;
- a machine dealer passes you warranty work, and nobody knows how much of theirs is open.
Field service: a job for a machine that never leaves the floor
You cannot bring a machining centre into the workshop, so the job is opened for the machine itself even though it stays on site: model, serial number, and the customer’s asset number in the “Product code” field. Create a repair type such as “Site visit” and work items like “Call-out” and “On-site labour, per hour” with prices: they go onto the estimate as lines, and the job list can be filtered by repair type.
The site address, how to get in, who meets you at the gate and when the machine can be stopped all go into the customer’s notes. Whoever opens the job sees them as soon as the company is selected; the engineer sees them on the phone on the way there.
To be straight about it: there is no dispatch calendar or visit scheduler. You agree the slot the way you always have; the software keeps what was done, who went and what it cost.
Spindle repair on the bench
A spindle that runs noisy, hot or out of true comes off the machine and goes to you. It gets its own job: model, spindle serial number, and in “Product code” the machine it came from. Under contents you list what arrived with it — collet, nut, tool holder, cable, coolant fittings — and that prints on the job sheet the customer signs.

Measurements go into the work log: “taper runout before 0.02 mm; front bearing pair and rear bearing replaced; preload set; rotor balanced; run-in 2 h, housing 38 °C; runout after 0.003 mm”. The work log and recommendations (“warm up before cutting”, “keep the taper clean”) print on the work report, so the customer gets the numbers the spindle left with in writing. The advanced text search finds that entry a year later.
Three identical spindles from the same shop? Fill in the first job and copy the rest: customer, model and fault carry over, and you enter each serial number.
Burnt motor winding in a spindle or axis motor? Rewinding has its own page: electric motor repair software. VFDs, control boards and cabinet power supplies are covered under industrial electronics repair software.
Downtime in plain sight
Each job has a promised date. Once it passes, the row turns red and the “overdue” tile gathers those jobs. The “urgent” flag marks machines that are holding up production and has its own tile above the list.
Waiting for bearings? The job goes to “awaiting parts”. A parts request can be emailed to the supplier straight from the job, and the history shows when it was ordered and when it arrived. Statuses of your own — “On the bench”, “Run-in”, “Waiting for machine shutdown” — are added to the status list with a colour and a tile.
When it is done, the customer gets an email or a Telegram message, and finished jobs show how many days they have been waiting for collection.
Estimates: the bearings may cost more than the labour
High-precision spindle bearings often cost more than the rebuild itself. After inspection the job goes to “awaiting approval” and the itemised estimate — labour from your work list, parts from stock — is sent by email or Telegram. The customer sees every line and the total and clicks “I agree” or “I decline”; the answer is saved in the history with the date.

A job can take several payments — a deposit for bearings, the rest by bank transfer once the machine runs. The software shows what is still due, the “unpaid” filter lists jobs handed back but not paid, and the customer card shows the total balance. The work report prints with your company details in the header and the estimate as a table. There is no invoice form: you raise invoices in your accounting tool.
Stock: bearings, drives, limit switches
Stock is a movement log: goods in with cost and supplier, parts issued to a job as an estimate line, returns from a job, write-offs with a reason, stocktakes. Spindle bearings, stepper and servo drives, limit switches and sensors, collets, belts, coolant pumps, brushes and bellows covers each get a minimum level, and the “running low” tile shows what to reorder. Quantities are whole numbers, so track bearings as single units or as sets. More on spare parts tracking.

Stock counts units, not serial numbers. Record the serial of a drive you fitted in the job’s work log.
Dealers, warranty and repeat repairs
If a machine dealer hands you warranty work, set the dealer up as a partner: jobs are linked to the partner and the list can be filtered by it. The date of sale is recorded at intake, so you can see whether the warranty still applies. A spindle back with the same fault gets the “Repeat” repair type, and its serial number brings up everything done before. Your own repair warranty goes as text into the printed work report template.
Reports show how many jobs each engineer completed and for how much, and the “Repairs” report lists what was done as estimate lines. Machine hydraulics — clamping, power units, cylinders — have their own page: hydraulics repair software.
Working on the customer’s equipment
Machine shutdown and lockout, site access and health and safety follow the customer’s site rules and the law where you work. Who carries the cost of downtime and how fast you commit to respond belongs in your service contract; a short clause in the terms on your job sheet helps. The software only records what was done and when.
Typical repair prices
A rough guide only — prices vary with region, machine and parts: on-site call-out with diagnosis €100–300, axis drive or limit switch replacement with setup €80–250 plus the part, wood router spindle rebuild with new bearings €400–1,200 plus bearings, machining centre spindle €1,500–6,000 and up, backlash and geometry adjustment €200–800. You set your own prices in the work list.
What it does not do
- no dispatch calendar, preventive maintenance plans or service reminders, no machine-hour tracking;
- no separate vibration analysis reports — readings go into the work log;
- no photos or file attachments, no serial-number tracking in stock, no supplier integrations;
- no invoices, no SMS, no mobile app (the phone browser works), no online payment by customers.
What it costs
One price for the whole business — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a spindle with its collet under contents, log the runout in the work log and set a promised date.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- Field service: a job for the machine on the customer’s floor, a “Site visit” repair type, address and access notes on the customer card.
- Spindle repair on the bench: runout, bearings and balancing in the work log and on the work report.
- Downtime in view: promised date, “overdue”, “urgent”, “awaiting parts”.
- Bearings and drives in stock by quantity, with minimum levels.
- Deposits for parts, customer balance, a work report with your company details.
- €20 a month for the whole business.
See also
Test equipment repair software
For shops repairing oscilloscopes, multimeters, bench power supplies, soldering stations and signal generators: other repairers and companies as customers, before-and-after readings on the work report, hard-to-find parts on order.
Read moreStarting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.