Car key repair software for automotive locksmiths
For car key shops and automotive locksmiths: transponder keys, remote and smart keys, shell and button repairs, batteries, and mobile call-outs — deposits before the blank is cut, key blanks and chips in stock by the piece, and a signed note of the ownership documents shown.

ServiceCenterSoft is job-tracking software for car key shops and automotive locksmiths: duplicate transponder keys, flip keys, remote and smart keys, key programming, shell replacements, circuit board and button repairs, batteries. Every key is a ticket with a deposit, an itemised estimate and a signed note of the documents the customer showed. Blanks, chips and shells sit in stock by the piece with minimum levels. It runs in the browser — on the shop PC and on your phone next to the customer’s car.
If what lands on your bench is modules rather than keys — engine control units, instrument clusters, immobiliser units at board level, head units — the auto electronics repair software page is closer to you. This page is about the key as a job: small, quick and usually paid up front.
Small jobs that quietly lose money
Customers arrive with the same few stories: “I’ve only got one key left”, “the shell fell apart”, “the buttons are worn through”, “it went through the wash”, “I’ve lost every key”. Then there is the trade — garages, body shops and used car dealers who need a spare before a car is sold or handed back.
Half of this work takes thirty minutes, so writing it down feels like overhead. Until this happens:
- a blank was cut for a customer who never came back — and it cannot go back on the rack;
- a price given over the phone was “definitely less” at collection;
- two hundred look-alike blanks and chips in the drawer, and the one you need ran out today;
- a customer returns after six months with a complaint, and nobody knows which shell or chip was used;
- the van is out on a job and the shop cannot say when it will be free;
- nobody recorded who ordered a key for that car, or what they showed when they did.
Key programming shop job tracking: one key, one ticket
Each job is a ticket with a number, a status and a price. Find the customer by phone number or add a new one on the spot. Device types follow your work: “Transponder key”, “Flip key”, “Smart key”, “Remote fob”, “Key shell”, “Ignition lock”. The model field takes the vehicle’s make, model and year; the fault is written the way the customer says it: “need a spare”, “buttons don’t unlock”, “car doesn’t recognise the key”, “blade snapped”.
There is no dedicated VIN field. If you want to pull up every key made for one vehicle, put the VIN in the serial number field — the software shows earlier tickets with the same serial number. Otherwise the history is still there under the customer.
“Accessories” records what was left with you: “1 working key, remote with flat battery, key ring”. “Condition” covers cracked shells, worn buttons, water marks, signs of an earlier repair. Both print on the job sheet the customer signs — see the repair receipt page for how it looks.

Proof of ownership: a note on the ticket
Key shops commonly ask to see photo ID and the vehicle’s registration or title before they take a job, and each shop sets its own conditions for accepting work. The software does not perform that check and does not replace it. What it does is keep your note: in “Accessories” you write what was shown — for example “shown: photo ID, vehicle registration” — and that line stays on the ticket with the date, the name of the person who booked it in and the customer’s signature.
To be clear: you cannot attach photos or scans of documents to a ticket — it is text only. Record no more than you actually need. Who you may make a key for, on what evidence, and which customer details you may keep are governed by the rules where you trade; if in doubt, ask a lawyer or your trade association.
Estimate and deposit before the blank is cut
A cut blank or a programmed chip cannot be sold to the next customer, so the part is paid for up front. A ticket can take several payments: a deposit when the key is ordered, the balance at handover. The ticket shows “received” and “balance due”, and the “unpaid” filter lists finished work that has not been paid.
The estimate is built line by line: labour from your “Works” list — “cut blade”, “program key”, “replace shell”, “replace buttons” — and parts from stock: blank, chip, shell, battery. If the price turns out higher than first quoted, the ticket moves to “awaiting approval” and the estimate goes to the customer by email or Telegram. The link shows every line with “I agree” and “I decline” buttons; the answer and the date land in the history.
A key that has been dropped or soaked has to be looked at first. Give the device type a diagnostics price and switch the ticket’s base to “diagnostics only” — the customer sees the amount from day one.

Mobile jobs on the same ticket
With all keys lost, the car is not coming to you. A call-out is the same ticket: the address lives on the customer card, the urgent flag and the promised date sit on the ticket. You define your own statuses — for example “Call-out booked”, “Blank on order”, “Awaiting approval”, “Ready for collection”, “Done”. Any status can sit as a tile above the list, and every change with a comment goes into the history with date and name.
On site, the ticket opens in the phone’s browser: address, estimate, notes. You add lines and record the payment there. There is no dispatch calendar or route map — in the morning you filter tickets by technician and status, and navigate with the app you already use.
Stock: blanks, chips, shells and batteries
Stock is a movement journal: receipts with cost price and supplier, items used on a job as estimate lines, returns, stocktakes. Each item’s card shows which ticket every piece went to. A minimum level and the “running low” tile tell you to reorder fast-moving blanks and coin cells in time. Quantities are whole numbers, which suits keys: everything is counted by the piece.
There is no key code database and no chip-to-vehicle compatibility chart. Put the fitment into the item name, the way you already search for it. A rare blank is ordered for the customer: the parts request goes to the supplier by email from the ticket, which waits in “Waiting for parts”. More on spare parts tracking.

Garages and dealers as trade accounts
Garages and dealers who send work regularly are kept as partners: the partner is set on the ticket, and the list filters by it — how many jobs came from each, what is ready, what is unpaid. For accounts paying by bank transfer there is a “Company” field, and the customer card shows what is owed across all tickets.
Ready, warranty and comebacks
When a key is ready, the customer gets an email or a Telegram message; you can resend it, at most once a day. Setup is covered on the customer notifications page. Every finished job shows how many days it has been waiting, and the counter turns red once the free storage period from your settings has passed.
A complaint? Search by phone number: handover date, estimate lines, which shell and battery went in. The “Repeat repair” type lets you filter comebacks in the ticket list. Your warranty wording goes into the completion report form under “Print forms”, and the “Recommendations” field carries advice such as “keep the key away from your phone” or “change the battery every two years”.
What car key work typically costs
A rough guide only — prices vary by region, key type and vehicle: battery replacement €5–15, shell replacement €25–70, board repair or new buttons €30–80, duplicate transponder key €50–150, remote or smart key €120–350, call-out €30–90, a new key with all keys lost €200–600. You set your own prices in the “Works” list and in the estimate lines.
What it does not have
- a key code database or chip compatibility charts;
- any document check — only your own note of what was shown;
- photos, scans or file attachments on a ticket;
- a dispatch calendar or route map;
- SMS, a mobile app, or online payment by the customer;
- integrations with suppliers.
What it costs
One price for the whole shop — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a duplicate key, record the deposit and add a blank from stock to the estimate.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- One ticket per key, with an estimate, a deposit and the customer’s signature.
- What the customer showed for the vehicle — a line on the ticket; you do the checking, not the software.
- Mobile jobs on the same ticket, with your own statuses, on your phone.
- Blanks, chips, shells and batteries counted by the piece, with minimum levels.
- Garages and dealers as partners, with a filter and a balance.
- €20 a month for the whole shop.
See also
Eyeglass repair software for optical shops and repair workshops
For eyewear repair shops and optical stores with a repair bench: while-you-wait fixes logged in a minute, frame condition signed for at drop-off, lens replacement in the customer’s own frame with a deposit, promised dates and uncollected orders.
Read moreStarting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.