Eyeglass repair software for optical shops and repair workshops
For eyewear repair shops and optical stores with a repair bench: while-you-wait fixes logged in a minute, frame condition signed for at drop-off, lens replacement in the customer’s own frame with a deposit, promised dates and uncollected orders.

ServiceCenterSoft is job-tracking software for shops that repair glasses — an independent eyewear repair workshop, a mail-in repair service, or the repair bench at the back of an optical store. Screws and nose pads, temple tips, hinges and spring hinges, soldering and laser welding of metal frames, nylon cord on semi-rimless frames, new lenses fitted into the customer’s own frame. Every job is a ticket with a number, a promised date, a price and a history. It runs in the browser, on the counter PC and on a phone.
This page is about repairs only. If the same counter also swaps watch batteries, see watch repair software; if you solder chains and resize rings as well, see jewelry repair software.
Who it is for, and what goes wrong
People cannot simply do without their glasses. Many have no spare pair, so half your customers want the job done while they wait, and the other half start calling the morning after drop-off. An eyewear repair shop therefore runs two queues at once: ten-minute fixes at the counter and jobs that take days because a part or a pair of lenses has to arrive first.
The usual trouble spots:
- small fixes never get written down — “it was just a screw” — so nobody knows how many were done or what was charged;
- a frame is taken in for soldering, the scratched lenses are not noted, and at collection “that wasn’t there before”;
- an old acetate frame cracks while new lenses are being fitted, and the customer was never warned;
- lenses were ordered with no deposit, and the customer changed their mind;
- “ready by Thursday” was promised, but only the technician who is off today knows where the job stands;
- finished glasses sit in a drawer for months, and nobody remembers whether the customer was ever told.
While-you-wait repairs: a ticket in a minute
For small jobs to be recorded, the paperwork has to be quicker than the repair. You find the customer by phone number or add a new one on the same form. Item types are your own list: “Metal frame”, “Plastic frame”, “Semi-rimless”, “Rimless”, “Sunglasses”. Your price list of standard jobs holds the usual lines — “screw replacement”, “nose pads, pair”, “temple tips”, “frame adjustment”, “ultrasonic clean”. Pick a line and the amount is on the ticket.
A customer with two pairs? The second ticket is a copy of the first: customer, type and notes carry over, and you only change the fault. A “copy last ticket” button helps when the queue is long and the jobs are alike.
At the end of the day the reports show how many jobs were done and for how much, overall and per technician — including all those two-minute fixes that used to vanish.
The customer’s own frame: condition on a signed ticket
Glasses left with you need a proper description. The model field takes whatever is still legible on the temple. “Condition” records scratched lenses, worn plating, cracks near the hinges, signs of an earlier repair, bent temples. “Accessories” lists the case, cloth, chain, spare pads. All of it prints on the ticket the customer signs; the repair receipt page shows what that document looks like.
Some risks are better stated up front. Aged plastic can crack when lenses are fitted. Soldering discolours the finish around the joint. A worn hinge cannot always be saved. You write a general warning yourself into the wording of your ticket under “Print forms”, so it sits above the signature on every job. The specific note — “frame brittle, customer informed of the risk” — goes into “Condition” on that ticket.
You cannot attach photos to a ticket. If you photograph a frame at drop-off, keep the pictures on your side and note on the ticket that photos were taken.

Lens replacement: prescription as text, and a deposit
New lenses in an existing frame are the longest and most expensive job in the shop. Lenses are made for one person and usually cannot go back to the lab. So three things matter: exactly what was ordered, how much was paid up front, and when the lenses are due.
To be clear about prescriptions: there are no dedicated fields for sphere, cylinder, axis or pupillary distance. The values from the customer’s prescription are typed as plain text into the fault field: “replace lenses to customer’s prescription: …, coating as agreed”. That field prints on the ticket, so the customer signs for exactly what you will order. The software does not validate those numbers and is no substitute for an eye examination — it only stores what you enter. Internal details — the lab’s order number, which tray the frame is in — go into the technician notes, which the customer does not see.
A ticket can take several payments: a deposit for the lenses at drop-off, the balance at collection. The ticket shows “received” and “balance due”, and the “unpaid” filter lists finished jobs that have not been paid. The lens request can be emailed to your supplier straight from the ticket. Statuses are yours to define — “Waiting for lenses”, “Lenses in”, “At soldering”, “Waiting for fitting” — and any of them can sit as a tile above the list, so one click shows every job held up by the lab.

Soldering and bigger repairs: price first
A soldered bridge, a new hinge or a rebuilt frame can cost enough that the customer would rather buy new. Let them decide, on record. The itemised estimate — labour from your price list, parts from stock — goes out by email or Telegram. The link shows every line with “I agree” and “I decline” buttons; the answer and date land in the ticket history. Agreed over the phone instead? Write it as a comment on the status change, and it is kept with the date and your name.
Promised dates that hold
Every ticket has a promised date. Overdue jobs turn red and gather under the “overdue” filter, so you see them in the morning, not when the customer is already at the counter. For someone who cannot manage without their glasses there is an urgent flag, and those jobs stand out in the list. When a customer rings, a search by phone number brings up the ticket, its status and the latest comment, whoever is on shift.
Small-parts stock
Stock is a movement journal: receipts with cost price and supplier, items used on a job as estimate lines, returns, stocktakes. For glasses repair that means screws in several sizes, nose pads, temple tips, hinges, spring hinges, bushings for rimless mounts, nylon cord, cases and cloths. Each item has a minimum level, and the “running low” tile tells you when to reorder. Quantities are whole numbers, so count screws singly or by the pack and cord by the cut length or the reel.

Ready for collection, and glasses nobody collects
When a job is done, the customer gets an email or a Telegram message; you can resend it, at most once a day. Setup is covered on the customer notifications page. The software does not send SMS.
Each finished job shows how many days it has been waiting. Once the free storage period from your settings has passed, the counter turns red and a “past free storage” filter gathers those jobs. The painful case is a pair with made-to-order lenses that is never collected — which is exactly where the deposit on the ticket helps.
What you may do with an uncollected order, and who is allowed to dispense prescription eyewear, depends on the rules where you trade and on the terms the customer accepted. The software does not track any of that; if in doubt, ask a lawyer.
What eyeglass repairs typically cost
A rough guide only — prices vary by region, frame material and difficulty: screw replacement €3–10, nose pads €5–15 a pair, temple tips €8–20, frame adjustment €0–10, hinge or spring hinge repair €15–45, soldering a metal frame €25–60, laser welding €40–90, nylon cord replacement €8–20, fitting lenses into the customer’s frame €15–40 plus the lenses. You set your own prices in the price list of jobs and in the estimate lines.
What it does not have
- dedicated prescription fields — dioptres and pupillary distance are plain text;
- eye examinations or patient records;
- an optical point of sale — selling new glasses or lenses without a repair ticket;
- photos or file attachments on a ticket, label printing;
- SMS, a mobile app, or online payment by the customer;
- integrations with lens labs or suppliers.
What it costs
One price for the whole shop — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: add a “Metal frame” type, book a frame in for soldering with a promised date, record a deposit and send the estimate for approval.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- A screw or a pair of nose pads — a ticket in a minute, priced from your list of jobs.
- Frame and lens condition on a ticket the customer signs.
- Prescriptions as plain text; no dedicated dioptre fields.
- Made-to-order lenses with a deposit and your own “Waiting for lenses” status.
- Soldering and costly repairs — estimate approval by link.
- Promised dates, an urgent flag and an overdue filter.
- Finished glasses with a day counter and a notice by email or Telegram.
- €20 a month for the whole shop.
See also
Starting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read morePhone repair shop software
Intake in a minute, screens and batteries tracked, a ready-for-pickup email, output per technician.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.