Server repair software
For businesses repairing servers, storage arrays, switches and routers: companies, hosting firms and ISPs as customers, due dates agreed in contracts, serial numbers of drives and power supplies, spares in stock, RMA returns to the manufacturer.

ServiceCenterSoft is repair-tracking software for businesses that fix server and network hardware: rack and tower servers, storage arrays and disk shelves, switches, routers, firewalls and access points. Every unit gets a job with a number, a due date, an itemised estimate and a full history. It runs in the browser — on the PC at your bench and on your phone when you are standing in a customer’s server room.
Your customers are businesses
Nobody walks in off the street with a 2U server. Your customers are companies with their own server rooms, hosting providers and small data centres, ISPs with switches out at their points of presence, and MSPs or system integrators who look after other people’s infrastructure and send the hardware to you. For all of them downtime costs money, so the first question is “when” and only then “how much”.
Where IT hardware repairs usually go wrong:
- the contract with an ISP sets a response time, but nobody can say what date was promised for a particular switch;
- two drives and a PSU came out of a server, and six months later nobody knows which serial numbers were in it before;
- a faulty unit went back to the vendor under warranty with no RMA number or ship date on record;
- you run out of a common drive model the week three servers arrive with the same failure;
- an integrator drops off hardware for three of its own clients and it gets mixed up at intake.
One account per company
Hardware from one company is brought in by a sysadmin, a courier or a driver, but the customer in the software is one: the company name goes in the “Company” field, prints on the job sheet and work report, and finds every unit in the job list. The customer card holds all jobs, payments, the balance owed and notes — site address, access arrangements, who to call, what the contract says about turnaround.
When an MSP or integrator brings in hardware that belongs to its client, set the integrator up as a partner. Jobs are linked to the partner and the job list can be filtered by it, so you can see how much is in progress for each one.
Businesses rarely pay at the counter. A job can take several payments — a deposit for parts, the balance by bank transfer — and the software shows what is still due, while the “unpaid” filter lists jobs handed back but not paid for. There is no invoice form: the software prints a job sheet and a work report, and you raise the invoice in your accounting tool.
Contracted turnaround — no SLA clock, but always in view
The software has no SLA timers and does not manage contracts. What it does: at intake you set a promised date; once it passes, the row turns red and the “overdue” tile gathers those jobs. The “urgent” flag marks what has to go first and has its own tile above the list. Contract terms — response time, support hours, escalation contact — go into the customer’s notes, so whoever books the unit in sees them as soon as the company is selected.
If you go on site, add a repair type such as “Site visit” and a “Call-out” line with a price in the work list: it goes on the estimate, and jobs can be filtered by repair type. There is no visit calendar — you agree the slot as you always have.
Serial numbers: chassis, drives, power supplies
A job holds the model, the serial number (for a server, usually the chassis service tag) and a “Product code” field, which is a good place for the customer’s asset tag. The advanced search looks up model, serial number and product code, even by part of the number.
Drives that arrive with a server are listed under contents with their serial numbers — “4 × SAS drives, S/N …, …, …, …; 2 PSUs” — and printed on the job sheet the customer signs. What came out and what went in is written in the work log: “PSU S/N … replaced with S/N …; drive in bay 3 S/N … replaced with S/N …, array rebuilt”. The text search covers the work log and comments, so a year later the question “where did this drive come from” has an answer.

Ten identical switches? Fill in the first job completely and copy the rest: customer, device type, model and fault carry over, and you enter each serial number.
About data. The data on the drives belongs to the customer. Whether you may copy it and how removed media are destroyed is a matter for your contract and local law; a short clause in the terms on your job sheet helps. The software only records what was done and when. For data on PC and laptop drives, see computer repair software.
Spares: drives, PSUs, fans
Stock is a movement log: goods in with cost and supplier, parts issued to a job as an estimate line, returns from a job, write-offs with a reason, stocktakes. Common drive sizes, PSUs, fans, memory modules, SFP transceivers and RAID controller batteries each get a minimum level, and the “running low” tile shows what to reorder. A parts request can be emailed to the supplier straight from the job. More on spare parts tracking.

To be clear: stock counts units, not the serial number of each drive. The serial of a fitted drive lives in the job’s work log, not on the stock item.
RMA returns to the manufacturer
Some failed PSUs and drives are replaced by the vendor or distributor under warranty. The date of sale is recorded at intake, so you can see whether the warranty still applies. For units sent away, create your own status such as “At vendor (RMA)” with a colour and a tile above the job list — one click shows everything that is not on your shelf. Put the RMA number and ship date in the comment on the status change; it sits in the history with the date and the name of whoever made it.

A stock part you send back to the supplier is written off with the reason “returned under warranty”. If you are a brand’s authorised service, warranty repairs are charged at the manufacturer’s price list — see authorised service. There is no link to vendor RMA portals: you raise the case on their site and keep the number on the job.
Approval and collection
A storage controller repair can cost half the price of a new one. After diagnosis the job goes to “awaiting approval” and the estimate is sent by email or Telegram; the customer sees every line and the total and clicks “I agree” or “I decline”, and the answer is saved with the date. When it is done, the customer gets an email or a Telegram message, and finished units show how many days they have been waiting.
Servers in a rack usually sit next to a UPS — for UPS repairs and battery swaps see UPS repair software.
Typical repair prices
A rough guide only — prices depend on region, model and parts: server diagnosis €60–150, drive or PSU swap with testing €30–80 plus the part, server motherboard repair €200–800, switch or router repair €80–400, on-site call-out to a server room €80–200. You set your own prices in the work list.
What it does not do
- no SLA timers, contract management or visit calendar;
- no hardware monitoring and no tickets created from it;
- no vendor RMA portal or supplier integrations, no serial-number tracking in stock;
- no photos or file attachments, no invoices, no SMS, mobile app or online payment by customers.
What it costs
One price for the whole business — no extra charge for staff or branches.
Monthly
Paid every month, cancel whenever you like.
Yearly
Cheaper than paying monthly. Invoice or card payment.
Custom work
Changes tailored to the way you work — hourly, by agreement.
Off-the-shelf not enough — your own forms, roles, reports or workflow? We will build a program for you. How it works
Try it without signing up in the demo: book in a server with its drives listed under contents, log a PSU swap in the work log and set a promised date.

We are very happy working with servicecentersoft.com: they built everything we asked for, even though our request was unusual, since we deal with medical devices. Everything was done precisely and on the agreed schedule. Thank you for the cooperation — we keep working together.

I tried the ServiceCenterSoft demo and came away with a good impression. The program is simple and easy to understand, yet it has everything you need for the job: customers, repairs, devices, spare parts, statuses and statistics.
I especially liked the dark theme and the responsive design — working from a phone is perfectly comfortable. Another plus is the instant search that works as you type, so you don't have to press a separate "Search" button every time.
You can tell the program was built specifically for service centers rather than being a generic CRM adapted for the repair business. The interface has no unnecessary frills; everything is logical and to the point.
A good, practical tool for the day-to-day work of a service center.

I liked that you get a free 14-day trial and that they are willing to handle my special requests — setting things up exactly the way I need them.
I also liked how payment works. You can simply pay the monthly fee by card online — basically the same as a regular Spotify subscription or any other service. No separate contracts to sign and no invoices to pay manually.
And there's no feeling of strict limits on the number of employees. One service center is one account, and inside it you can organize the work of your technicians and run several branches.
For me this is far more convenient than plans where you have to pay for every single user or keep counting how many employees are working today.

My business is fairly specific, so the program's standard features weren't enough — I needed my own custom fields, my own sorting options and search by additional parameters. The work completion certificate and the printed repair receipt also needed some changes to fit the way we work.
I contacted technical support. To be honest, I expected changes like these to take a long time, but everything was done within a single day. The team quickly understood exactly what we needed, suggested the right solution and did everything properly.
I'd especially like to mention the support: they get straight to the point, with no unnecessary bureaucracy, and they genuinely help instead of just sending you off to read the documentation.
For me this is a big advantage of the program: it isn't just sold "as is" — it can be adapted to how you actually work. Thanks to the team for the quick response and for treating the customer right.
Highly recommended!
In short
- Each company, ISP or integrator is one account with company name, balance and notes.
- Contracted turnaround: promised date, “overdue” and “urgent” — no SLA clock.
- Chassis serial, asset tag in “Product code”, drive and PSU serials in contents and the work log.
- Drives and PSUs in stock by quantity, with minimum levels.
- RMA returns: your own status and the RMA number in the history.
- €20 a month for the whole business.
See also
Starting your own repair shop: where to begin
For people who can fix phones and laptops and want to work for themselves: what a small repair business needs on day one, the paperwork that protects you from the first customer, and how to run a shop in a country whose language is not your own.
Read moreSoftware for home appliance service
Contents recorded at intake, warranty at the brand price list, callouts, slow parts and partner shops.
Read morePhone repair shop software
Intake in a minute, screens and batteries tracked, a ready-for-pickup email, output per technician.
Read moreSee how it works
The demo is open — go in and try it. Ask us anything by email, Telegram or the form on this site.